The job below is no longer available.
You might also like
in Nevada, MO
- $14
Verified per hour Meeks Lumber Company • 23h agoJust posted Urgently hiring 15.8 mi Use left and right arrow keys to navigate 
$100,000Verified per year - $1,990
Verified per week Core Medical Group • 3d agoUrgently hiring Use left and right arrow keys to navigate - $2,070
Verified per week Core Medical Group • 3d agoUrgently hiring Use left and right arrow keys to navigate - $1,930
Verified per week TotalMed Allied • 3d agoUrgently hiring Use left and right arrow keys to navigate
Multi-Skilled Maintenance Technician - Full-time / Part-time
•30 days ago
| Hours | Full-time, Part-time |
|---|---|
| Location | Nevada, Missouri |
About this job
Job ID: 71650
3M is seeking Multi-Skilled Maintenance Technicians for the Safety and Graphis Business Group located in Nevada, MO. Ready to be part of what's next?
Job Summary :
The person hired for the position of Multi-Skilled Maintenance Technician will install, move, troubleshoot, repair, modify and make adjustments to mechanical/electrical equipment and devices used in production, laboratory, office, and utility areas.
Primary Responsibilities include but are not limited to the following:
- Diagnose, test, repair and make adjustments to AC and DC motors and drive systems that range in size from fractional horsepower to hundreds of horsepower
- Diagnose, repair, calibrate, and make adjustments to pneumatic, electrical and electronic systems, control loops and P.I.D. loops (4-20 milliamps)
- Diagnose, repair and make adjustments to industrial controllers, including analog and digital programmable controllers (PLCs)
- Perform minor installation and modification of control and power wiring, up to and including 480 volts A.C., within N.E.C. and OSHA standards
- Know and understand the dangers of improper installation or modification of hazardous locations and intrinsically safe circuits. Assure compliance with proper procedures on work involving Intrinsically Safe and explosion proof wiring, both in hands-on practices and in changing or modifying of DC elementary drawings
- Read, understand, and appropriately change AC and DC elementary drawings and wiring diagrams in accordance with established 3M practices
- Develop and maintain competence with computer keyboards, operating systems, and computer based diagnostic programs to monitor, diagnose, and evaluate problems with electrical/electronic manufacturing equipment and systems
- Set up and safely operate testing and measuring instruments, such as chart recorders, meggers, ammeters, oscilloscopes, potentiometers, V.O.M., V.T.V.M., gauges and recorders to diagnose, evaluate, and troubleshoot electrical/electronic systems problems
- Diagnose, repair and make adjustments to electrical systems used on mobile equipment such as fork trucks, tractors, trucks, and welders
- Troubleshoot, repair and make standard adjustments to fixed and variable speed mechanical and hydraulic power transmission components, elements and systems
- Troubleshoot, repair and make standard adjustments to reciprocating piston equipment such as air compressors and piston operated hydraulic pumps
- Perform preventive maintenance tasks, including lubrication of equipment and machinery, following standard procedures as indicated on P.M. route sheets or in equipment manuals
- Install equipment and machinery according to prints or drawings using standard methods of leveling, tramming and precision alignment of machine components such as shafts, bearings, gears, pulleys, rolls, and couplings
- Troubleshoot, repair and make standard adjustments to mechanical, hydraulic and pneumatic equipment and machinery including fixed and variable speed power transmission systems
- Install mechanical and electrical piping to plant or production equipment
- Move material, equipment and machinery using standard methods of lifting, rigging, hoisting, blocking, skidding and rolling
- Use proper metal joining techniques such as arc and acetylene welding, brazing and soldering, as required for installation and repair of equipment
- Perform light metal fabrication, wood construction, painting, and other miscellaneous or general maintenance work as may be required
- Set up and operate shop equipment such as hand tools, electric and air-powered portable tools, carpentry tools and machine tools including, but not limited to, lathes, milling machines, grinders, drill presses and saws
This position will require:
- Working overtime
- Weekend work
- Working on holidays as needed
- Short notice call in
- Working rotating shifts
Basic Qualifications:
- Possess a High School Diploma or GED and minimum 3 years of maintenance experience in a manufacturing/industrial environment OR a two year technical degree in an electrical, elctro-mechanical or mechatronics field
Preferred Qualifications:
- Previous multi-skilled experience in the basic trades (electrical/mechanical)
- Previous PLC programming experience or training
Location: Nevada, MO
Relocation: Is not authorized
Qualified applicants will be required to take and pass 3M elected testing as a part of the selection process.
About 3M
Do you see the world differently? Are you inspired by how a simple shift can result in big change? Do you share your ideas in the hopes of coming up with something even better by working together? Then join 3M! With 88,000 people around the world in more than 70 countries and $30 billion in sales, 3M is committed to building on our rich heritage by bringing our best to the innovations we create. Be part of improving how people live and work every day. Be part of what's next at 3M! Follow us @3MCareers and learn more at YouTube.com/3MCareers.
Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status)
Apply now for this exciting opportunity with 3M. 3M is an EEO/AA employer. Women, minorities, veterans, and individuals with disabilities are encouraged to apply.
Posting Notes: ||Nevada ||Missouri ||United States ||US Compliance Boards ||
3M is seeking Multi-Skilled Maintenance Technicians for the Safety and Graphis Business Group located in Nevada, MO. Ready to be part of what's next?
Job Summary :
The person hired for the position of Multi-Skilled Maintenance Technician will install, move, troubleshoot, repair, modify and make adjustments to mechanical/electrical equipment and devices used in production, laboratory, office, and utility areas.
Primary Responsibilities include but are not limited to the following:
- Diagnose, test, repair and make adjustments to AC and DC motors and drive systems that range in size from fractional horsepower to hundreds of horsepower
- Diagnose, repair, calibrate, and make adjustments to pneumatic, electrical and electronic systems, control loops and P.I.D. loops (4-20 milliamps)
- Diagnose, repair and make adjustments to industrial controllers, including analog and digital programmable controllers (PLCs)
- Perform minor installation and modification of control and power wiring, up to and including 480 volts A.C., within N.E.C. and OSHA standards
- Know and understand the dangers of improper installation or modification of hazardous locations and intrinsically safe circuits. Assure compliance with proper procedures on work involving Intrinsically Safe and explosion proof wiring, both in hands-on practices and in changing or modifying of DC elementary drawings
- Read, understand, and appropriately change AC and DC elementary drawings and wiring diagrams in accordance with established 3M practices
- Develop and maintain competence with computer keyboards, operating systems, and computer based diagnostic programs to monitor, diagnose, and evaluate problems with electrical/electronic manufacturing equipment and systems
- Set up and safely operate testing and measuring instruments, such as chart recorders, meggers, ammeters, oscilloscopes, potentiometers, V.O.M., V.T.V.M., gauges and recorders to diagnose, evaluate, and troubleshoot electrical/electronic systems problems
- Diagnose, repair and make adjustments to electrical systems used on mobile equipment such as fork trucks, tractors, trucks, and welders
- Troubleshoot, repair and make standard adjustments to fixed and variable speed mechanical and hydraulic power transmission components, elements and systems
- Troubleshoot, repair and make standard adjustments to reciprocating piston equipment such as air compressors and piston operated hydraulic pumps
- Perform preventive maintenance tasks, including lubrication of equipment and machinery, following standard procedures as indicated on P.M. route sheets or in equipment manuals
- Install equipment and machinery according to prints or drawings using standard methods of leveling, tramming and precision alignment of machine components such as shafts, bearings, gears, pulleys, rolls, and couplings
- Troubleshoot, repair and make standard adjustments to mechanical, hydraulic and pneumatic equipment and machinery including fixed and variable speed power transmission systems
- Install mechanical and electrical piping to plant or production equipment
- Move material, equipment and machinery using standard methods of lifting, rigging, hoisting, blocking, skidding and rolling
- Use proper metal joining techniques such as arc and acetylene welding, brazing and soldering, as required for installation and repair of equipment
- Perform light metal fabrication, wood construction, painting, and other miscellaneous or general maintenance work as may be required
- Set up and operate shop equipment such as hand tools, electric and air-powered portable tools, carpentry tools and machine tools including, but not limited to, lathes, milling machines, grinders, drill presses and saws
This position will require:
- Working overtime
- Weekend work
- Working on holidays as needed
- Short notice call in
- Working rotating shifts
Basic Qualifications:
- Possess a High School Diploma or GED and minimum 3 years of maintenance experience in a manufacturing/industrial environment OR a two year technical degree in an electrical, elctro-mechanical or mechatronics field
Preferred Qualifications:
- Previous multi-skilled experience in the basic trades (electrical/mechanical)
- Previous PLC programming experience or training
Location: Nevada, MO
Relocation: Is not authorized
Qualified applicants will be required to take and pass 3M elected testing as a part of the selection process.
About 3M
Do you see the world differently? Are you inspired by how a simple shift can result in big change? Do you share your ideas in the hopes of coming up with something even better by working together? Then join 3M! With 88,000 people around the world in more than 70 countries and $30 billion in sales, 3M is committed to building on our rich heritage by bringing our best to the innovations we create. Be part of improving how people live and work every day. Be part of what's next at 3M! Follow us @3MCareers and learn more at YouTube.com/3MCareers.
Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status)
Apply now for this exciting opportunity with 3M. 3M is an EEO/AA employer. Women, minorities, veterans, and individuals with disabilities are encouraged to apply.
Posting Notes: ||Nevada ||Missouri ||United States ||US Compliance Boards ||