The job below is no longer available.
You might also like
in Fort Bliss, TX
$57est. per hour El Paso Children's Hospital • 1h agoUrgently hiring 11.1 mi Use left and right arrow keys to navigate- $36
est. per hour DaVita Inc • 1h agoUrgently hiring 11.1 mi Use left and right arrow keys to navigate - $36
est. per hour El Paso Children's Hospital • 1h agoUrgently hiring 11.1 mi Use left and right arrow keys to navigate 
$22est. per hour Texas Mechanical Contractors • 23h ago9.9 mi Use left and right arrow keys to navigate
$11est. per hour C&B CONSULTING OF TX LLC • 22h ago13.1 mi Use left and right arrow keys to navigate
GSE Mechanic, Army C-12, CBA, Ft. Bliss, TX - Full-time / Part-time
•30 days ago
| Hours | Full-time, Part-time |
|---|---|
| Location | Fort Bliss, Texas |
About this job
The Ground Support Equipment (GSE) Mechanic performs operational checks, service, and repair of GSE. Applies technical knowledge and experience to solve problems and to troubleshoot and repair GSE electrical, hydraulic, and mechanical systems and components. Performs tire and wheel maintenance and build up. Evaluates GSE discrepancies to identify methods of repair and/or replacement. Identifies necessary parts, materials and tooling requirements, and provides timely estimates for all maintenance within scope of responsibility. Perform inspections quarterly, semiannually, and annually.
*LI-AE1
Experience Requirements:
* Three (3) years' experience as a GSE mechanic
* Experience in corrosion detection, treatment and prevention
Education/Training Requirements:
* High school diploma or GED.
* Ability to read, write, and interpret instructions, technical manuals and/or directives in English and to follow and administer verbal and written instruction.
* Hazardous Waste Communications.
* AS9100C Program Awareness FOD and TCP Awareness.
* Operational Risk Management, Anti-Terrorism, and Security/Safety Training Security Clearance Awareness.
* Satisfactory completion of U.S. Armed Forces ground support maintenance repair courses or equivalent.
* Certification/Re-certification Requirements: CDI and Support Equipment Operator License
* Valid state driver's license required -- must maintain throughout employment.
* Ability to meet any Government/Company licensing/qualification requirements.
* Should have vocational, trade or factory school in diesel engines.
* Should have vocational, trade or factory training in generator repair.
Clearance Requirements:
* Must be able to obtain and maintain a Secret security clearance.
Other Key Qualification Requirements:
* Ability to perform the scope of physical movements and postures normally associated with hangar/flight line activities.
* Full knowledge of fuel systems, hydraulic systems, electrical systems, mechanical systems, gas and diesel internal combustion engines on GSE.
* Thorough knowledge of GSE, aircraft and ground safety procedures, applicable maintenance / technical manuals, basic tools, special tools, and test equipment.
* Should have a thorough knowledge of fuel systems.
* Should have a thorough knowledge of small gasoline engines.
* Should have a thorough knowledge of air conditioning systems.
* Should have knowledge in basic electricity both A/C and D/C systems.
* Should have knowledge in electrical circuitry.
* Should be able to perform light welding, brazing and soldering.
* Should have knowledge in hydraulic systems.
* Should be able to read and comprehend service manuals, wiring schematics, and flow charts.
* Should be able to set up service schedules, keep records and maintain all GSE equipment as a
fleet.
* Should be able to troubleshoot, diagnose and repair all of the GSE equipment on site.
Working Conditions:
Environmental conditions are diverse and could range from an office environment where there is no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail and hearing protection is required. Office work conditions will expend approximately 25% of the candidates' time and approximately 75% will be expended in more harsh conditions.
L-3 is an equal opportunity employer. We encourage minorities, women, veterans and disabled individuals to apply.
*LI-AE1
Experience Requirements:
* Three (3) years' experience as a GSE mechanic
* Experience in corrosion detection, treatment and prevention
Education/Training Requirements:
* High school diploma or GED.
* Ability to read, write, and interpret instructions, technical manuals and/or directives in English and to follow and administer verbal and written instruction.
* Hazardous Waste Communications.
* AS9100C Program Awareness FOD and TCP Awareness.
* Operational Risk Management, Anti-Terrorism, and Security/Safety Training Security Clearance Awareness.
* Satisfactory completion of U.S. Armed Forces ground support maintenance repair courses or equivalent.
* Certification/Re-certification Requirements: CDI and Support Equipment Operator License
* Valid state driver's license required -- must maintain throughout employment.
* Ability to meet any Government/Company licensing/qualification requirements.
* Should have vocational, trade or factory school in diesel engines.
* Should have vocational, trade or factory training in generator repair.
Clearance Requirements:
* Must be able to obtain and maintain a Secret security clearance.
Other Key Qualification Requirements:
* Ability to perform the scope of physical movements and postures normally associated with hangar/flight line activities.
* Full knowledge of fuel systems, hydraulic systems, electrical systems, mechanical systems, gas and diesel internal combustion engines on GSE.
* Thorough knowledge of GSE, aircraft and ground safety procedures, applicable maintenance / technical manuals, basic tools, special tools, and test equipment.
* Should have a thorough knowledge of fuel systems.
* Should have a thorough knowledge of small gasoline engines.
* Should have a thorough knowledge of air conditioning systems.
* Should have knowledge in basic electricity both A/C and D/C systems.
* Should have knowledge in electrical circuitry.
* Should be able to perform light welding, brazing and soldering.
* Should have knowledge in hydraulic systems.
* Should be able to read and comprehend service manuals, wiring schematics, and flow charts.
* Should be able to set up service schedules, keep records and maintain all GSE equipment as a
fleet.
* Should be able to troubleshoot, diagnose and repair all of the GSE equipment on site.
Working Conditions:
Environmental conditions are diverse and could range from an office environment where there is no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail and hearing protection is required. Office work conditions will expend approximately 25% of the candidates' time and approximately 75% will be expended in more harsh conditions.
L-3 is an equal opportunity employer. We encourage minorities, women, veterans and disabled individuals to apply.