The job below is no longer available.
You might also like
in Riverside, CA
$22Verified per hour Kimco Staffing • 4h agoUrgently hiring 17.9 mi Use left and right arrow keys to navigate
$18est. per hour Connect Staffing • 22h agoJust posted 17.1 mi Use left and right arrow keys to navigate- $19
est. per hour - $23
est. per hour - $20 - $25
Verified per hour Key Skilled • 22h agoGood pay 3.2 mi Use left and right arrow keys to navigate
Conventional Machinist with G-codes - Full-time
•30 days ago
| Hours | Full-time |
|---|---|
| Location | 3847 S. Pierce Street, Suite H Riverside, California |
About this job
Conventional Machinist with CNC mill and lathe needed for our client in Riverside. Must have knowledge and experience programming via G-Codes at the controller. Sets-up and operates conventional, special purpose, and/or computer-numerical control (CNC) machines and machining centers to fabricate parts by performing the following duties.
This is a temp to hire position paying $18-20hr doe.
Shift 8 -12 hour shifts, with possible 1/2 on Saturdays; however, hours may vary based on production, Start time approximately 630am; however must be flexible.
Duties include:
Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
Measures, marks, and scribes dimensions and reference points on material or work piece as guides for subsequent machining.
Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, jig borers, grinders, and shapers.
Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
Verifies conformance of finished work piece to specifications.
Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data.
Fits and assembles parts into complete assembly.
Verifies dimensions and alignment of assembly.
Installs machined replacement parts in mechanisms, machines, and equipment, and tests operation of unit to ensure functionality and performance.
Operates welding equipment to cut or weld parts.
Develops specifications from general description and draws sketch of part or product to be fabricated.
Confers with engineers, production personnel, programmers, or others to resolve machining or assembly problems.
Performs duties, not previously listed, to complete assigned tasks
#LI-AY1
Staffmark is committed to providing equal employment opportunity for all persons regardless of race, color, religion, sex, sexual orientation, gender identity, age, marital status, national origin, citizenship status, disability or veteran status.
This is a temp to hire position paying $18-20hr doe.
Shift 8 -12 hour shifts, with possible 1/2 on Saturdays; however, hours may vary based on production, Start time approximately 630am; however must be flexible.
Duties include:
Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
Measures, marks, and scribes dimensions and reference points on material or work piece as guides for subsequent machining.
Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, jig borers, grinders, and shapers.
Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
Verifies conformance of finished work piece to specifications.
Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data.
Fits and assembles parts into complete assembly.
Verifies dimensions and alignment of assembly.
Installs machined replacement parts in mechanisms, machines, and equipment, and tests operation of unit to ensure functionality and performance.
Operates welding equipment to cut or weld parts.
Develops specifications from general description and draws sketch of part or product to be fabricated.
Confers with engineers, production personnel, programmers, or others to resolve machining or assembly problems.
Performs duties, not previously listed, to complete assigned tasks
#LI-AY1
Staffmark is committed to providing equal employment opportunity for all persons regardless of race, color, religion, sex, sexual orientation, gender identity, age, marital status, national origin, citizenship status, disability or veteran status.
Requirements
Must have knowledge and experience programming via G-Codes at the controller. Sets-up and operates conventional, special purpose, and/or computer-numerical control (CNC) machines and machining centers to fabricate parts by performing the following duties.