The job below is no longer available.
You might also like
in Fresno, CA
$22est. per hour California Commercial Works • 21h ago4.3 mi Use left and right arrow keys to navigate- $18.00
Verified per hour BBSI- Modesto • 13h agoJust posted 49.3 mi Use left and right arrow keys to navigate - $17
est. per hour
Blast & Coat (Painter) - Full-time / Part-time
•30 days ago
| Hours | Full-time, Part-time |
|---|---|
| Location | Fresno, CA Fresno, California |
About this job
Job Title: Blaster
I. Position Purpose
Under the direction of the Assistant Plant Manager, perform a normal range of metal preparation, prime and finish painting operations on pump parts, sub-assemblies and assembled pumps of various sizes and models.
II. Key Responsibilities
* Operate from work orders, written and verbal instructions, national standard procedures, and direction from Supervisor, to prepare, prime and finish painting operations on pump parts, sub-assemblies and assembled pumps of various sizes and models.
* Operate various equipment, machinery and tools which consist of paint spraying units, paint booth, overhead crane, paint brushes, sanders, grinders, scrapers, hand and power wire brushes, masking tape and paper, cleaning solvents, grease, oil,
steel wool, paint, paint thinner and a variety of miscellaneous hand tools and materials pertinent to cleaning and painting.
* Determine type of blast to perform and type of paint to apply by reading job operation listing.
* Move pump parts from yard to spray booth with lift truck and overhead hoist. Use hand and power wire brush scrapers,solvents, etc., to prepare metal for painting operations. Tape and mask unit to protect areas not to be painted. Set up painting equipment, adjust spray guns, clean, thoroughly stir paint, fill paint tanks and add thinner as required. Stamp a metal tag with job name and job number and attach to parts for identification purposes.
* Determine and perform thickness of coating (2 color or 3 color) from coatings manufacturer recommendations or from Engineering job specifications. Spray paint prime, and/or finish with epoxy 2-part coating process. Whenever possible, use water booth to filter paint out of the air. Mix paint to match non-standard colors and perform touch-up and cleaning as assigned. Clean paint line by running thinner through prior to mixing and changing color. Assist in loading finished pumps on to skids.
* Manually log the amount of VOC (volatile organic compound content) sprayed each day using the listing from paint coatings manufacturer. Follow procedures for storage, usage and disposal of paint.
* Detect and report faulty operations, defective material and equipment, work order or written instruction discrepancies, and other unusual conditions to the proper Supervisor.
* Maintain equipment and workplace in neat and orderly condition. Make out time and production reports manually or enter prescribed information into designated data input terminal.
* Observe all safety and ISO 9001/14001 Requirements.
* May be required to train new and existing employees on the operation of a specific machine within the shop.
* Perform other related duties as assigned.
III. Relationships
* Position currently reports to the Assistant Plant
* Internal relationships exist with all functional department heads and staff.
* External relationships exist with select suppliers/vendors, customers
IV. Performance Measures
* Teamwork and cooperation
* Completion of assigned task and responsibilities
V. Physical Demands & amp; Work Environment
* The work may require considerable and strenuous physical exertion such as frequent lifting, pushing or pulling of heavy objects < 50 pounds. The work involves moderate risks or discomforts requiring special safety precautions, e.g. working around moving parts, moving equipment (i.e. forklifts, overhead cranes), rotating equipment or machines. Routine use of personal protective equipment is required and adherence to all safety precautions.
Full Time Temp to Hire, position will start at $11.00 - $12.00 hr depending on experience. Please submit resumes
I. Position Purpose
Under the direction of the Assistant Plant Manager, perform a normal range of metal preparation, prime and finish painting operations on pump parts, sub-assemblies and assembled pumps of various sizes and models.
II. Key Responsibilities
* Operate from work orders, written and verbal instructions, national standard procedures, and direction from Supervisor, to prepare, prime and finish painting operations on pump parts, sub-assemblies and assembled pumps of various sizes and models.
* Operate various equipment, machinery and tools which consist of paint spraying units, paint booth, overhead crane, paint brushes, sanders, grinders, scrapers, hand and power wire brushes, masking tape and paper, cleaning solvents, grease, oil,
steel wool, paint, paint thinner and a variety of miscellaneous hand tools and materials pertinent to cleaning and painting.
* Determine type of blast to perform and type of paint to apply by reading job operation listing.
* Move pump parts from yard to spray booth with lift truck and overhead hoist. Use hand and power wire brush scrapers,solvents, etc., to prepare metal for painting operations. Tape and mask unit to protect areas not to be painted. Set up painting equipment, adjust spray guns, clean, thoroughly stir paint, fill paint tanks and add thinner as required. Stamp a metal tag with job name and job number and attach to parts for identification purposes.
* Determine and perform thickness of coating (2 color or 3 color) from coatings manufacturer recommendations or from Engineering job specifications. Spray paint prime, and/or finish with epoxy 2-part coating process. Whenever possible, use water booth to filter paint out of the air. Mix paint to match non-standard colors and perform touch-up and cleaning as assigned. Clean paint line by running thinner through prior to mixing and changing color. Assist in loading finished pumps on to skids.
* Manually log the amount of VOC (volatile organic compound content) sprayed each day using the listing from paint coatings manufacturer. Follow procedures for storage, usage and disposal of paint.
* Detect and report faulty operations, defective material and equipment, work order or written instruction discrepancies, and other unusual conditions to the proper Supervisor.
* Maintain equipment and workplace in neat and orderly condition. Make out time and production reports manually or enter prescribed information into designated data input terminal.
* Observe all safety and ISO 9001/14001 Requirements.
* May be required to train new and existing employees on the operation of a specific machine within the shop.
* Perform other related duties as assigned.
III. Relationships
* Position currently reports to the Assistant Plant
* Internal relationships exist with all functional department heads and staff.
* External relationships exist with select suppliers/vendors, customers
IV. Performance Measures
* Teamwork and cooperation
* Completion of assigned task and responsibilities
V. Physical Demands & amp; Work Environment
* The work may require considerable and strenuous physical exertion such as frequent lifting, pushing or pulling of heavy objects < 50 pounds. The work involves moderate risks or discomforts requiring special safety precautions, e.g. working around moving parts, moving equipment (i.e. forklifts, overhead cranes), rotating equipment or machines. Routine use of personal protective equipment is required and adherence to all safety precautions.
Full Time Temp to Hire, position will start at $11.00 - $12.00 hr depending on experience. Please submit resumes
Your Privacy Choices