The job below is no longer available.
You might also like
in Chillicothe, OH
$31est. per hour Howmet • 4h agoUrgently hiring Use left and right arrow keys to navigate- $18
est. per hour PACCAR • 4h agoUrgently hiring Use left and right arrow keys to navigate 
$23est. per hour Think Power Solutions LLC • 22h agoUse left and right arrow keys to navigate - $23
est. per hour FORJAK Industrial • 22h ago19.3 mi Use left and right arrow keys to navigate - $11.60 - $16.25
Verified per hour Pilot Company • 30d agoGood pay Use left and right arrow keys to navigate
Production Tech
•30 days ago
| Hours | Full-time, Part-time |
|---|---|
| Location | Chillicothe, OH Chillicothe, Ohio |
About this job
• Valve Stemmer
1. Using the build schedule, select appropriate valve stem components for wheel.
2. Assemble valve stem components by hand.
3. Operate Nut Runner to install valve stems (if applicable).
• Sequencer
1. Inspect machine using daily checklist.
2. Use of air-operated O/H crane to lift wheels onto conveyer.
3. Maintain correct wheels in line-set order.
4. Ensure wheels are fed to mounter in such a manner that minimizes down time.
• Tire Flipper
1. Inspect machine using daily checklist.
2. Roll tire from line-set position to branding/match-mark station at end of conveyor.
3. Lay tire on conveyor, locate brand area and brand appropriate tires.
4. Record DOT number (if applicable).
5. By rolling or using hoist, put tire onto conveyer.
• QA
1. Measure tire pressure to 110 + 5 PSI.
2. Measure concentricity to customer standards.
3. May handle shortages.
• Catcher
1. Remove assembly from conveyor after tilt table reaches vertical position via automatic switch or by operating correct foot pedal to activate pneumatic assist.
2. Depending on operation, use hoist or roll assembly to appropriate station, conveyer, balancer or rack.
3. Monitor sequence of assembly using build sheet
• Balancer (if applicable)
1. Set controls on Balancer to appropriate size and style of wheel (Aluminum or Steel).
2. Remove first tire/wheel assembly from front of conveyor (same as catcher) and roll to balancer station.
3. Check air pressure in tire, adjust if necessary.
4. Secure assembly to balancer and proceed with balancing process.
5. Locate balanced position and apply wheel weights securely with mallet.
6. Remove assembly from balancer and roll into appropriate rack.
7. Label the correct line sequence number on assembly
• Mobile Equipment Operator
1. Must be certified.
2. Safely transport tires, wheels and assemblies through out warehouse.
3. Safely load and unload trucks, including racks of assemblies on flatbed trailer.
4. When loading and unloading trucks, make sure truck jack is in place and wheels are choked.
5. Using build schedule verify tires, wheels and assemblies are in appropriate sequence.
6. Distribute loads to appropriate location in warehouse; on assembly line or in truck.
7. Monitor and change out propane tank.
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
POSITION REQUIREMENTS:
• High School diploma or GED
• Prefer at least one year of manufacturing experience in a wheel environment
• Must be able to work in a team environment
• Ability to work OT, Holidays and different shifts, as required.
LANGUAGE SKILLS: Good oral and written communication ability
MATHEMATICAL SKILLS: Basic addition, subtraction
REASONING ABILITY
• Possesses the ability to analyze and resolve routine and reoccurring problems.
• Ability to read and comprehend work instructions.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• Approximately 90% of time is spent walking and standing on feet.
• There is a frequent need to perform the following physical activities: Bend, stoop squat, push, pull, reach above the shoulders and lift up to 25 lbs on a regular basis.
1. Using the build schedule, select appropriate valve stem components for wheel.
2. Assemble valve stem components by hand.
3. Operate Nut Runner to install valve stems (if applicable).
• Sequencer
1. Inspect machine using daily checklist.
2. Use of air-operated O/H crane to lift wheels onto conveyer.
3. Maintain correct wheels in line-set order.
4. Ensure wheels are fed to mounter in such a manner that minimizes down time.
• Tire Flipper
1. Inspect machine using daily checklist.
2. Roll tire from line-set position to branding/match-mark station at end of conveyor.
3. Lay tire on conveyor, locate brand area and brand appropriate tires.
4. Record DOT number (if applicable).
5. By rolling or using hoist, put tire onto conveyer.
• QA
1. Measure tire pressure to 110 + 5 PSI.
2. Measure concentricity to customer standards.
3. May handle shortages.
• Catcher
1. Remove assembly from conveyor after tilt table reaches vertical position via automatic switch or by operating correct foot pedal to activate pneumatic assist.
2. Depending on operation, use hoist or roll assembly to appropriate station, conveyer, balancer or rack.
3. Monitor sequence of assembly using build sheet
• Balancer (if applicable)
1. Set controls on Balancer to appropriate size and style of wheel (Aluminum or Steel).
2. Remove first tire/wheel assembly from front of conveyor (same as catcher) and roll to balancer station.
3. Check air pressure in tire, adjust if necessary.
4. Secure assembly to balancer and proceed with balancing process.
5. Locate balanced position and apply wheel weights securely with mallet.
6. Remove assembly from balancer and roll into appropriate rack.
7. Label the correct line sequence number on assembly
• Mobile Equipment Operator
1. Must be certified.
2. Safely transport tires, wheels and assemblies through out warehouse.
3. Safely load and unload trucks, including racks of assemblies on flatbed trailer.
4. When loading and unloading trucks, make sure truck jack is in place and wheels are choked.
5. Using build schedule verify tires, wheels and assemblies are in appropriate sequence.
6. Distribute loads to appropriate location in warehouse; on assembly line or in truck.
7. Monitor and change out propane tank.
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
POSITION REQUIREMENTS:
• High School diploma or GED
• Prefer at least one year of manufacturing experience in a wheel environment
• Must be able to work in a team environment
• Ability to work OT, Holidays and different shifts, as required.
LANGUAGE SKILLS: Good oral and written communication ability
MATHEMATICAL SKILLS: Basic addition, subtraction
REASONING ABILITY
• Possesses the ability to analyze and resolve routine and reoccurring problems.
• Ability to read and comprehend work instructions.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• Approximately 90% of time is spent walking and standing on feet.
• There is a frequent need to perform the following physical activities: Bend, stoop squat, push, pull, reach above the shoulders and lift up to 25 lbs on a regular basis.
Your Privacy Choices