The job below is no longer available.
You might also like
in Oklahoma City, OK
- $21
est. per hour - $21
est. per hour 
$20.49Verified per hour Coca Cola Southwest Beverages • 8h agoGood pay Urgently hiring 7 mi Use left and right arrow keys to navigate- $18
est. per hour Coca Cola Southwest Beverages • 8h agoUrgently hiring 7 mi Use left and right arrow keys to navigate - $17
est. per hour DISH • 11h agoJust posted Urgently hiring 17.5 mi Use left and right arrow keys to navigate
Maintenance Technician
•30 days ago
| Hours | Full-time, Part-time |
|---|---|
| Location | Oklahoma City, OK Oklahoma City, Oklahoma |
About this job
2nd shift position
Assists in performing preventative and urgent maintenance of production machinery and equipment.
1. Repair and replace defective electrical equipment and electronic circuitry.
2. Install all electrical components on new plant equipment.
3. Design and configure new electrical and hydraulic systems to replace obsolete electro-hydraulic-PLC controls on Parabolic Taper Mills.
4. Design, build and implement electric-over-hydraulic-control devices to replace pneumatic-controlled devices currently in operation.
5. Validate infrared sensors and adjust servo motors on gas valve train to provide precise control of leaf spring forging temperature.
6. Design PLC-controlled proprietary equipment.
7. Recommend and maintain minimum stocking quantities of electrical supplies, circuit boards, temperature controllers, thermocouples, infrared sensors, oil pumps, valves, circuit breakers, electrical starters, electrolytes, transformers and plant lighting supplies.
8. Adjust servo valves on leaf spring forging and heat treating furnaces to maintain maximum fuel efficiency.
9. Monitor 3-phase high voltage transformers, switch gear, starters, relays, motors and control panels. Schedule preventive maintenance to prevent system failure.
10. Perform facilities lighting maintenance by replacing bulbs, ballasts and fixtures on a weekly basis.
11. Perform scheduled maintenance on water treatment pumping units, water chiller pumping units, quench oil re-circulating closed loop system and air to oil heat exchangers.
12. Train employees in the safe operation of electrical equipment.�� Work Environment: �� Loud, hot and dirty manufacturing plant. Over 150 total employees running production 24/7.�� Qualifications: �� 1. 2+ years of industrial maintenance experience preferably with hydraulic and pneumatics , PLC troubleshooting and diagnostics.
2. Proficient in blueprint reading.
3. Preferred experience with monitoring and adjusting combustion controls on gas-fired leaf spring slot furnaces��
1. Repair and replace defective electrical equipment and electronic circuitry.
2. Install all electrical components on new plant equipment.
3. Design and configure new electrical and hydraulic systems to replace obsolete electro-hydraulic-PLC controls on Parabolic Taper Mills.
4. Design, build and implement electric-over-hydraulic-control devices to replace pneumatic-controlled devices currently in operation.
5. Validate infrared sensors and adjust servo motors on gas valve train to provide precise control of leaf spring forging temperature.
6. Design PLC-controlled proprietary equipment.
7. Recommend and maintain minimum stocking quantities of electrical supplies, circuit boards, temperature controllers, thermocouples, infrared sensors, oil pumps, valves, circuit breakers, electrical starters, electrolytes, transformers and plant lighting supplies.
8. Adjust servo valves on leaf spring forging and heat treating furnaces to maintain maximum fuel efficiency.
9. Monitor 3-phase high voltage transformers, switch gear, starters, relays, motors and control panels. Schedule preventive maintenance to prevent system failure.
10. Perform facilities lighting maintenance by replacing bulbs, ballasts and fixtures on a weekly basis.
11. Perform scheduled maintenance on water treatment pumping units, water chiller pumping units, quench oil re-circulating closed loop system and air to oil heat exchangers.
12. Train employees in the safe operation of electrical equipment.�� Work Environment: �� Loud, hot and dirty manufacturing plant. Over 150 total employees running production 24/7.�� Qualifications: �� 1. 2+ years of industrial maintenance experience preferably with hydraulic and pneumatics , PLC troubleshooting and diagnostics.
2. Proficient in blueprint reading.
3. Preferred experience with monitoring and adjusting combustion controls on gas-fired leaf spring slot furnaces��
2. Install all electrical components on new plant equipment.
3. Design and configure new electrical and hydraulic systems to replace obsolete electro-hydraulic-PLC controls on Parabolic Taper Mills.
4. Design, build and implement electric-over-hydraulic-control devices to replace pneumatic-controlled devices currently in operation.
5. Validate infrared sensors and adjust servo motors on gas valve train to provide precise control of leaf spring forging temperature.
6. Design PLC-controlled proprietary equipment.
7. Recommend and maintain minimum stocking quantities of electrical supplies, circuit boards, temperature controllers, thermocouples, infrared sensors, oil pumps, valves, circuit breakers, electrical starters, electrolytes, transformers and plant lighting supplies.
8. Adjust servo valves on leaf spring forging and heat treating furnaces to maintain maximum fuel efficiency.
9. Monitor 3-phase high voltage transformers, switch gear, starters, relays, motors and control panels. Schedule preventive maintenance to prevent system failure.
10. Perform facilities lighting maintenance by replacing bulbs, ballasts and fixtures on a weekly basis.
11. Perform scheduled maintenance on water treatment pumping units, water chiller pumping units, quench oil re-circulating closed loop system and air to oil heat exchangers.
12. Train employees in the safe operation of electrical equipment.�� Work Environment: �� Loud, hot and dirty manufacturing plant. Over 150 total employees running production 24/7.�� Qualifications: �� 1. 2+ years of industrial maintenance experience preferably with hydraulic and pneumatics , PLC troubleshooting and diagnostics.
2. Proficient in blueprint reading.
3. Preferred experience with monitoring and adjusting combustion controls on gas-fired leaf spring slot furnaces��
About Aerotek:
Our people are everything. Since 1983, Aerotek has become a leader in recruiting and staffing services by building quality relationships that allow us to place quality people in quality jobs. With over 230 non-franchised offices, Aerotek serves 17,000 clients and 300,000 contract employees every year. To learn more, visit .
Aerotek is acting as an Employment Agency in relation to this vacancy.
Your Privacy Choices