You might also like
in Wichita Falls, TX
$21est. per hour Regal Rexnord Corp • 8h agoUrgently hiring 3.8 mi Use left and right arrow keys to navigate- M1 Support Services • 8h ago
Urgently hiring 3.8 mi Use left and right arrow keys to navigate 
$20est. per hour XPO • 8d agoUrgently hiring 5.7 mi Use left and right arrow keys to navigate- $18
est. per hour
MONOSHELL OPERATOR
| Estimated Pay | $12 per hour |
|---|---|
| Hours | Full-time, Part-time |
| Location | Wichita Falls, Texas |
Compare Pay
Estimated Pay$9.44
$12.30
$17.56
About this job
Howmet Aerospace's Wichita Falls, TX facility has an opening for Monoshell Operator.
Must be able to work rotating shifts. This Opening will be on a 7:00 p.m. to 7:00 a.m. shift
(Rotating shifts work 2 on 2 off, 3 on 2 off, 2 on 3 off)
JOB SUMMARY- Using Computers (entering information, etc)
- Must be able to read and interpret Product Criteria (PC) and Activity Instructions (AI).
- Must be able to function as a member of a team and be able to work under general supervision.
- Must be able to maintain expected quality levels.
- Comply with all site required policies and procedures including but not limited to: EHS, Quality, Code of Conduct and the Wichita Falls Employee employee handbook.
1. Selects patterns based on production schedules and capacity of line.
2. Checks for broken or poor-quality patterns.
3. Logs necessary information on lot travelers to monitor sequence of dips.
4. Performs the following basic processing steps, i.e., manually loads case on facecoat line, monitors robot to ensure mold is dipped/sanded in sequence, blows off excess sand after facecoats, monitors and applies code to hanger; monitors mold through cycle.
5. Examines mold throughout cycle to ensure adequacy of coating and sanding.
6. Performs required housekeeping tasks.
7. Fills stucco towers.
8. Performs other duties as required.
9. Complies with all EHS rules related to the work environment.
10. Works overtime when needed.
Mold Prep
1. Unloads molds from automatic line at unload stations.
2. Removes rubber gaskets from cups after all dip cycles are completed.
3. Cleans imbedded stucco and sand from inside pour cups as required.
4. Weighs molds from each truck to ensure minimum weight requirements before transporting truck to vac dry.
5. Operates vacuum chambers and pin puller per Activity Instruction guidelines.
6. Posts all required data - control charts, trouble reports, mold weights, etc.
7. Performs required housekeeping tasks.
8. Performs other duties as required.
9. Operates freezers per Activity Instruction guidelines.
10. Complies with all EHS rules related to the work environment.
Dewax
Dewax
1. Performs dewax operation utilizing oven and/or steam dewax unit.
2. Ensures area is well maintained.
3. Logs necessary information to monitor input quantity and quality.
4. Discards used wax from area.
5. Monitors operation of equipment and temperature controls.
6. Complies with all EHS rules related to the work environment.
- Comply with all department, facility, corporate and regulatory EHS regulations
- Wear all required personal protective equipment (PPE). Requires wearing safety glasses, earplugs, gloves, hard hats and Metatarsal shoes. Requires wearing flame retardant uniform.
- Report all job-related illness and injuries (Per Employee Handbook).
- Report all safety, health and environmental concerns to your supervisor in a timely manner.
- Attend all EHS training.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Employee is required to execute the following:
- Floor-to-waist lift and carry, lifting and carrying to the waist high level, carrying items with two hands.
- Push,pull and twist
- Gripping and pinching
- Be able to climb ladders and stairs
- Lifting up to 50 lbs. intermittently of various items.
- Good manual dexterity to operate computer equipment and precision measuring instruments.
- Position may require more than eight hours daily and more than five days weekly to complete work assignments
- Squatting/crouching/bending when retrieving stored items from lower shelves and file cabinets, moving equipment/product inspections,etc.
- Standing approximately 90% of the time.
- Clean work areas and maintain a clean work environment; perform 5S cleaning activities as required.
Work Environment:
- Slight exposure to chemicals, fumes, oil, dust, noise and heat or cold.
- Temperature and humidity-controlled environment/intermittent exposure to heat and kaowool dust.
BASIC QUALIFICATIONS:
- High School Diploma or GED from an accredited institution.
- Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
- This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
PREFERRED QUALIFICATIONS:
- Basic Computer skills
- Monoshell experience
- Job Identification 108449
- Job Category Operations
- Posting Date 03/21/2024, 09:56 PM
- Locations PO Box 1616, 6200 Central Frwy, Wichita Falls, TX, 76307-1616, US
- Job Schedule Full time
- Remote Work Schedule Availability? None
Your Privacy Choices