Shipfitter - Navy - Now Hiring

Responsibilities:

• Reports directly to the Assistant Foreman/Supervisor/Production Lead.
• Understands and follows PPE Policy.
• Lays out material utilizing drawings and blueprints prior to performing cutting/fitting operations.
• Maintains good housekeeping practices, turning off machines when not in use, disposing of waste
  properly, sweeping the area, etc.
• Ensures all tools listed on the "Required Tools List" are available for use within 30 days of employment.
• Acknowledging that all requirements of the Quality Assurance Manual are followed when invoked by
  QA Workbook.
• Identifies and notifies Supervisor of unsatisfactory conditions during the production operation.
• Fabricates and installs fixtures, jigs, supports and targets to ensure proper alignment during welding processes as directed by the Supervisor/Lead Mechanic.
• Basic computer skills.
• Assumes responsibility for Contractor (CFM) and Government (GFM) furnished materials.
• Ability to use lay-out tools such as tool scales, squares, combination squares, trammel points.
• Understands fitting of structural components using dogs, wedges, strong-backs, etc.
• Strict adherence to safety, quality standards, good housekeeping habits, high level of critical
  thinking/reading.
• Travel and overtime are required.
• Work outside specific trade skill as required.

Qualifications:

• Work Experience: Minimum 3+ years of Shipfitter experience.
• Understands and performs the setup, and operation of various portable tools and hand tools used in the
  trade including plasma cutting machines and oxy/fueltorches.
• Has knowledge of the following: shipboard plate (hull, deck, bulkhead) systems (repair/installation
  practices, procedures, alignments, and material requirements), blueprint reading and interpretation,
  MILSPEC requirements.
• Must be able to fit structural components to tolerance requirements.
• Tack and Fillet Weld qualifications preferred (FCAW/SMAW).
• Must have the ability to gain access to military bases and various government facilities

DA Notifications:

• Involves heavy lifting, frequent stooping, bending, crawling, reaching and possible working assignments in
  overhead structures, confined spaces or beneath machinery either indoors or outdoors in the elements and
  noisy conditions.
• Occasional lifting 50+ pounds.

Tooling Required:

• 25' Tape
• Center Punch
• 3 lb maul
• Chalk Box
• Combination Square
• Burning goggles
• Striker
• Full Face Welding Shield
• Welding Gloves
• Slag Hammer
• Bottle Wrench
• 12" Crescent Wrench
• Wire Cutters
• Lockable tool storage
• Pliers
• Utility Knife
• Tip Cleaner
• Flashlight
• Screwdriver

Work Environment:

• This position is performed in a traditional office environment with local travel required between facilities.
• Work Shift Hours: 6am - 4:30pm (Mon. - Thurs.); overtime potentially on Fridays.

Fairlead Integrated, LLC. and its subsidiaries are proud to be Equal Employ Opportunity and Affirmative Action employers (Minority / Female / Disability / Veterans).

To apply for this position, go here: Employment Application - Fairlead Integrated