TIG Pipe Tacker-Fabrication (GTAW)

FABRICATION TACKEREXPERIENCED TIG PIPE TACKERS NEEDED

We are seeking experienced TIG (GTAW) Pipe Tackers with proven, hands-on experience working with carbon steel pipe in a fabrication environment.

This is not an entry-level position. Previous professional TIG pipe welding or tacking experience is required. General welding experience without TIG pipe proficiency does not meet the qualifications for this position.

REQUIRED WELD TEST: Candidates must successfully complete an on-site TIG test - 2" Schedule 80 carbon steel pipe in the 5G position. Welds must pass both visual inspection and X-ray.

REQUIRED EXPERIENCE & QUALIFICATIONS

• Previous professional TIG (GTAW) welding or tacking experience on carbon steel pipe is required.

• Must have demonstrated hands-on experience producing quality TIG tack welds in a pipe fabrication or industrial environment.

• Must be proficient in TIG welding techniques, including proper heat control, puddle control, penetration, and weld consistency.

• Must understand pipe fit-up, joint preparation, alignment, root openings, and proper tack placement.

• Must have experience working with pipe in fixed positions, including horizontal and vertical welding applications.

• Must be able to produce sound TIG tack welds that meet visual and radiographic (X-ray) inspection requirements.

• Must be familiar with common pipe fabrication tools, measuring instruments, and welding equipment.

• Must be able to follow welding procedures, specifications, and fabrication requirements.

• Previous experience as a TIG Pipe Tacker, Fabrication Tacker, GTAW Pipe Welder, Pipe Tacker, or Combo Pipe Welder preferred.

Note: General MIG, Flux Core, or Stick welding experience without hands-on TIG pipe experience does not satisfy the minimum qualifications.

RESPONSIBILITIES

• Perform TIG (GTAW) tack welding on carbon steel pipe in a fabrication shop environment.

• Prepare and position pipe components for accurate fit-up and tack welding.

• Verify pipe alignment, joint preparation, root openings, and fit-up requirements prior to tacking.

• Produce consistent, high-quality TIG tack welds that maintain proper alignment and joint integrity.

• Adjust TIG welding equipment and settings according to approved procedures and job specifications.

• Maintain proper arc length, travel speed, heat input, and puddle control to produce sound tack welds.

• Inspect completed tack welds for visible defects and correct deficiencies as authorized.

• Use measuring tools, clamps, fixtures, grinders, and other fabrication equipment as required.

• Clean and prepare weld joints and surrounding surfaces prior to welding.

• Follow applicable welding procedures, fabrication drawings, and quality standards.

• Coordinate with pipefitters, production welders, and supervisors to maintain fabrication schedules and quality requirements.

• Maintain welding equipment, tools, and work areas in safe operating condition.

• Perform only tasks for which training and authorization have been provided.

• Follow company safety policies, safe work practices, and required personal protective equipment (PPE) standards.

• Identify and report unsafe conditions, equipment concerns, and potential quality issues.

• Participate in safety meetings, pre-job briefings, Task Hazard Analyses, and Job Safety Analyses.

• Report accidents and incidents and cooperate with required investigations.

• Work independently with minimal supervision while following established procedures and supervisor direction.

NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%)