Quality Assurance Inspector Nights

Location: West Valley, UT

Department: Quality Assurance

Reports To: Shift Supervisor

Direct Reports: None

Shift / Coverage:Night Shift - 4:00 PM - 2:30 AM (Monday - Thursday)

Position Description

The Quality Inspector is the front line of product conformity. This role inspects parts against prints, specifications, and inspection plans, documents what was found, and stops nonconforming material from moving forward. Every accept decision on the floor starts here.

The work is judgment as much as measurement. Selecting the right gage for the characteristic, verifying its calibration status before use, and interpreting a callout correctly are all part of producing a result that can be relied on. A measurement taken with the wrong instrument is not a measurement.

Authority here is deliberately asymmetric. This role can reject, hold, and refuse - without prior approval and without fear of reprisal - but it cannot accept nonconforming material, waive a requirement, or release a hold. That asymmetry is the point: stopping is always available, and passing is never a solo decision on a questionable part.

Escalation is a duty, not a fallback. Borderline, ambiguous, or unexpected conditions go to the Shift Supervisor rather than being decided alone, and a nonconforming vendor part is raised as a supplier corrective action request with complete inspection evidence. Cosmetic and non-dimensional SCARs route to the Shift Supervisor; dimensional ones route to Engineering.

Several people carry this role alongside another. Specialists take inspection assignment from the Shift Supervisor and meet the same qualification requirements as any inspector before working unsupervised. There is one inspection standard, and holding a second title does not change it.

Job Responsibilities

Inspection & Measurement

• Perform first-article, in-process, and final inspection per the applicable inspection plan and sampling requirement.

• Interpret prints, GD&T, specifications, and inspection plans correctly and consistently.

• Select and correctly use the appropriate gages and instruments; verify calibration status before use.

• Perform re-inspection and sorting activity as directed during containment.

Records & Traceability

• Record inspection results completely, legibly, and accurately, with full traceability to part, lot, and revision.

• Maintain a clean, organized inspection station and return issued gages in good condition.

Nonconformance & Escalation

• Identify, tag, and segregate nonconforming material immediately and notify the Shift Supervisor.

• Escalate borderline, ambiguous, or unexpected conditions rather than deciding alone.

• Support root cause investigation by providing accurate, factual observations of what was found.

Process Monitoring & SPC

• Record SPC data points accurately at the required sample size and frequency, and apply the reaction plan on the chart when a signal appears - stop, contain, notify the Shift Supervisor.