Good payJust postedUrgently hiring Use left and right arrow keys to navigate
Provided by the employer
Verified Pay check_circle $32.00 to $36.00 per hour
Hours Full-time
Location Phoenix, Arizona

Compare Pay

Verified Pay check_circleProvided by the employer
This job pays $3.76 per hour more than the average pay for similar jobs in your area.

$21.5

$30.24

$34.00

$39.15


About this job

Description

1. Installation of DAS Equipment:

o Installation of DAS Components: Install and configure RFS and JMA Wireless DAS components such as antennas, cables, remote units (RUs), base station controllers (BSC), and other related hardware.

o Cable Routing: Run and secure coaxial, fiber optic, and other cables through ceilings, walls, and conduits to connect DAS components.

o Antenna Installation: Install antennas at required locations (e.g., rooftops, inside ceilings) ensuring proper alignment and performance.

o Equipment Mounting: Mount and secure various DAS equipment on racks or other hardware.

2. System Integration:

o System Wiring and Connections: Ensure all components (e.g., base stations, repeaters, antennas, remote units) are properly wired and connected to the network.

o Power Supply Installation: Install power systems and backup power solutions (e.g., batteries, generators) for DAS components.

o Grounding and Safety: Implement grounding and safety measures for all installed equipment as per industry standards.

3. Testing and Commissioning:

o Initial Testing: Test the system after installation to ensure that all components are functioning as expected, including signal strength, connectivity, and performance.

o Walk Testing: Perform walk tests within the coverage area to verify signal coverage and performance. Identify any gaps or issues and troubleshoot.

o Documentation of Results: Record results from installation, testing, and commissioning activities. Document any deviations from the planned design and report them to the project manager or design team.

4. Troubleshooting and Problem Solving:

o Address Installation Issues: Identify and resolve any installation issues, such as poor cable connections, equipment malfunctions, or interference.

o On-Site Repairs: Troubleshoot and repair faulty equipment during installation or post-installation to ensure minimal downtime.

o Collaboration with RF Engineers: Work closely with RF engineers to address issues related to RF performance or signal coverage.

5. Safety Compliance and Standards Adherence:

o Adherence to Safety Protocols: Ensure all installations comply with safety standards and local regulations. Follow all safety protocols related to working at heights, electrical systems, and working with RF equipment.

o Proper Equipment Handling: Handle all DAS components, tools, and equipment according to manufacturer guidelines to prevent damage and ensure safe operation.

6. Ongoing Maintenance and Support:

o Routine Inspections: Conduct regular inspections and maintenance of installed systems to ensure long-term performance.

o Service and Repairs: Address any service requests or maintenance needs, including equipment upgrades or replacement.

o Customer Support: Provide technical support to clients as needed, offering assistance with troubleshooting or minor repairs.

7. Collaboration and Communication:

o Team Collaboration: Work closely with the project manager, engineers, and other installers to ensure project timelines are met and installations are completed to specification.

o Client Communication: Interact with clients on-site to ensure satisfaction and provide updates as necessary.

o Reporting: Provide detailed reports on installation status, issues encountered, and troubleshooting steps.

lead

1. All required tools from list

2. 4 years of experience

3. Ability to work independently

4. Basic troubleshooting techniques

5. Understand Prints/Drawings

6. Understand test results/ upload Test results

7. Proficient on test equipment

8. Enforces safety

Supervisor

1. OSHA 30

2. Lead a Project

3. Proficient in troubleshooting

4. Documentation and communication skills

5. Professional image

6. Job site coordination

7. Conduct QA/QC

8. Lead multiple crews

9. Close-out documentation

10. Scheduling meetings/ Produce a Schedule

11. Capable of supporting commissioning

12. Reviews drawings, submittals, risers, and specifications

13. Conduct Safety Tool Box topics

Skills

Cabling, Lead cable tech

Top Skills Details

Cabling,Lead cable tech

Additional Skills & Qualifications

Walk job sites in uneven terrain Work in extreme climates Work at heights and from ladders Regularly lift and/or move up to 39 pounds; and participate in group lifts for 40 pounds or more Bend or twist the body into unusual positions while working Push or pull heavy objects into position Work in noisy environments

Previous experience in telecommunications, electrical engineering, or other related fields

Familiarity with telecommunications equipment

Strong analytical and critical thinking skills

Strong attention to detail

Excellent written and verbal communication skills

Able to read blueprints

Must have clean BG, tools and reliable transportation

Technician Required On-site Tool List

1.) Pen

2.) Pencil

3.) Sharpie

4.) Snips

5.) 11 in 1 Screwdrivers

6.) Assorted Screwdrivers

7.) Wrenches

8.) PVC Cutter

9.) Adjustable Wrench

10.) Torpedo Level

11.) Tape Measure

12.) Channel locks

13.) Vise grips

14.) Hammer

15.) Wire Strippers

16.) Punch-down

17.) Wire Reamer

18.) Linemans Pliers

19.) Flush Cuts

20.) Diagonal Cutters

21.) Ratchet

22.) Sockets and Extensions

23.) Drill

24.) Impact Drill

25.) Drill Bits

26.) Security Bits

27.) Paddle Bits

28.) Driver sets

29.) Stud finder

30.) Non-contact Volt tester

Experience Level

Expert Level

Job Type & Location

This is a Contract to Hire position based out of Phoenix, AZ.

Pay and Benefits

The pay range for this position is $32.00 - $36.00/hr.

Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave)

Job Type & Location

This is a Contract to Hire position based out of Phoenix, AZ.

Application Deadline

This position is anticipated to close on Nov 30, 2026.

Workplace Type

This is a fully onsite position in Phoenix,AZ.

About TEKsystems

We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

About TEKsystems and TEKsystems Global Services

Were a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. Were a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. Were strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. Were building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com.

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.


Nearby locations

Posting ID: 1317498327 Posted: 2026-11-20 Job Title: Low Voltage