Good payJust postedUrgently hiring Use left and right arrow keys to navigate
Provided by the employer
Verified Pay check_circle $17.00 to $22.00 per hour
Hours Full-time
Location Tulsa, Oklahoma

Compare Pay

Verified Pay check_circleProvided by the employer
This job pays $1.63 per hour more than the average pay for similar jobs in your area.

$11.17

$19.50

$29.7


About this job

Job Title: Precision Grinder

Job Description

The Precision Grinder sets up and operates centerless grinding equipment to produce high-quality parts with precise finishes and tight tolerances. This role involves interpreting blueprints, performing accurate measurements, documenting inspection results, and maintaining a clean, safe, and well-organized work area in a climate-controlled machining environment.

Responsibilities

  • Set up and operate centerless grinders to produce parts that meet specified precision finishes and tolerances.
  • Read and interpret machining blueprints to determine grinding requirements and ensure parts meet design specifications.
  • Inspect finished parts using precision measuring tools and record inspection data as required by work instructions.
  • Document inspection results and other required information accurately for production and quality records.
  • Proactively identify equipment issues, communicate concerns to appropriate personnel, and recommend corrective actions or improvements.
  • Maintain a safe and orderly work environment in accordance with company standards and supervisory expectations.
  • Identify potential safety and process risks and make suggestions for correction in line with continuous improvement initiatives.
  • Utilize appropriate safety measures to ensure a safe work environment for all individuals in the work area.
  • Maintain work areas in an organized and clean condition consistent with 5S and other housekeeping initiatives.
  • Perform basic math calculations needed for measurements, setups, and part verification.
  • Properly use precision measuring equipment such as micrometers, calipers, and tape measures to verify part dimensions.
  • Perform other related duties as assigned by management to support production and quality goals.

Essential Skills

  • At least 1 year of grinding experience, preferably with precision or centerless grinding.
  • Ability to read and understand machining blueprints.
  • Ability to perform basic math calculations for measurements and setups.
  • Proficiency in using precision measuring tools such as micrometers, calipers, and tape measures.
  • Comfort working with hand tools in a machining or general labor environment.
  • High school diploma or general education degree (GED), or one to three months of related experience and/or training, or an equivalent combination of education and experience.
  • Ability to follow written work instructions and document inspection and production information accurately.
  • Commitment to maintaining a safe, clean, and organized work area in line with 5S and continuous improvement practices.

Additional Skills & Qualifications

  • Technical or trade school experience in machining or a related field is preferred.
  • Experience with manual grinders in a production environment is a plus.
  • Experience in machining operations is beneficial.
  • Experience using micrometers and calipers for detailed inspection work.
  • Familiarity with general inspection processes in a production setting.
  • Ability to work overtime, up to approximately 10 hours per week, when desired.

Why Work Here?

Join a professional, climate-controlled machining shop that values safety, organization, and continuous improvement. You will work in a structured environment that supports skill development in precision grinding and measurement, with opportunities to take on overtime when you want to increase your earnings. The focus on clear work instructions, quality standards, and 5S practices creates a stable and efficient workplace where your attention to detail and craftsmanship are appreciated.

Work Environment

This role is based in a climate-controlled machinist shop with a focus on safety, cleanliness, and organization. The primary schedule is a first-shift role, with working hours from approximately 6:00 a.m. to 2:30 p.m. Overtime is available, up to around 10 hours per week, for those who want to work extra. You will work around centerless grinding equipment, manual grinders, and standard machining tools, regularly using precision measuring instruments such as micrometers, calipers, and tape measures. The environment emphasizes adherence to 5S housekeeping practices and continuous improvement, providing a well-organized and efficient workspace.

Job Type & Location

This is a Contract to Hire position based out of Tulsa, OK.

Pay and Benefits

The pay range for this position is $17.00 - $22.00/hr.

Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave)

Job Type & Location

This is a Contract to Hire position based out of Tulsa, OK.

Application Deadline

This position is anticipated to close on Dec 4, 2026.

Workplace Type

This is a fully onsite position in Tulsa,OK.

About Aerotek

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.


Nearby locations

Posting ID: 1317836775 Posted: 2026-11-21 Job Title: Precision Grinder