The job below is no longer available.
You might also like
in Lewis Center, OH
PLC Controls Engineer
•30 days ago
Hours | Full-time, Part-time |
---|---|
Location | Lewis Center, Ohio |
About this job
Job Description
Job Description
Job Title: PLC Controls Engineer
Job Location: Spring Hill, TN / Lewis Center, Ohio
Job Description:
Familiar with automated assembly processes
Have commissioned automation cells with robotic
Automation before
Responsibilities:
Connect to equipment with a PC.
Flash Firmware on control equipment.
Download software to control equipment.
Commission Ethernet/IP Fieldbus network
Validate operation of safety equipment,
including E-Stops, Gates, and Light Curtains
Teach Servos
Establish communications to third-party
Equipment such as cameras and welders.
Operate equipment via HMI control in
Manual mode.
Communicate with build team so the
build team can correct build defects,
including alignments, sensor positioning,
and such
Operate equipment in dry cycle mode.
Support limited runs with product running
Through the machine.
Experience with the following Equipment & SW Packages:
Read and Understand Electrical Schematics
RSLogix v32.
Rockwell processors used for automation
Control.
Guard Logix Safety Programming
Siemens TIA Portal WinCC v15.1
Used for equipments HMIs
Ethernet/IP Fieldbus
Fanuc Robot Integration
Fanuc programming background is not
necessary, but being able to understand the
PLC side of handshaking with the Fanuc
controller is needed
Servo Applications
Positioning of devices, Pick and Places
Rockwell Kinetix 5700
Preferred:
Networking
Commissioning of Hirschmann managed
Ethernet switches.
Vision
Matrox Camera Systems \
Familiarity with MES systems
Customers have a proprietary system, a basic understanding of the principles behind an MES system is useful.
Job Location: Spring Hill, TN / Lewis Center, Ohio
Job Description:
Familiar with automated assembly processes
Have commissioned automation cells with robotic
Automation before
Responsibilities:
Connect to equipment with a PC.
Flash Firmware on control equipment.
Download software to control equipment.
Commission Ethernet/IP Fieldbus network
Validate operation of safety equipment,
including E-Stops, Gates, and Light Curtains
Teach Servos
Establish communications to third-party
Equipment such as cameras and welders.
Operate equipment via HMI control in
Manual mode.
Communicate with build team so the
build team can correct build defects,
including alignments, sensor positioning,
and such
Operate equipment in dry cycle mode.
Support limited runs with product running
Through the machine.
Experience with the following Equipment & SW Packages:
Read and Understand Electrical Schematics
RSLogix v32.
Rockwell processors used for automation
Control.
Guard Logix Safety Programming
Siemens TIA Portal WinCC v15.1
Used for equipments HMIs
Ethernet/IP Fieldbus
Fanuc Robot Integration
Fanuc programming background is not
necessary, but being able to understand the
PLC side of handshaking with the Fanuc
controller is needed
Servo Applications
Positioning of devices, Pick and Places
Rockwell Kinetix 5700
Preferred:
Networking
Commissioning of Hirschmann managed
Ethernet switches.
Vision
Matrox Camera Systems \
Familiarity with MES systems
Customers have a proprietary system, a basic understanding of the principles behind an MES system is useful.