The job below is no longer available.
You might also like
in Everett, WA
$124,064.00 - $186,105.93Verified per year Compass Health • 10h agoUrgently hiring Use left and right arrow keys to navigate- $128,460 - $205,545
Verified per year EvergreenHealth • 10h agoJust posted Urgently hiring 15.7 mi Use left and right arrow keys to navigate - $22.56 - $30.64
Verified per hour Verathon Inc. • 10h agoExcellent pay Urgently hiring 13.3 mi Use left and right arrow keys to navigate - $30
est. per hour Precision Castparts Corp. (PCC) • 10h agoUrgently hiring 13.5 mi Use left and right arrow keys to navigate - $18
est. per hour Precision Castparts Corp. (PCC) • 10h agoUrgently hiring 13.5 mi Use left and right arrow keys to navigate
Numerical Control Programmer 3
•2 days ago
| Estimated Pay | $23 per hour |
|---|---|
| Hours | Full-time, Part-time |
| Location | Everett, Washington |
Compare Pay
Estimated Pay We estimate that this job pays $22.66 per hour based on our data.
$18.38
$22.66
$31.37
About this job
Title: Numerical Control Programmer 3
Duration: 6 months
Location: Everett, WA
Provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction.
Searching for QTY 2 Composite NCP to provide Numerical Control Programming Expertise within the Pre-Cure / Green Part Space to support the manufacturing of detail parts within the 777 Composite Wing Center within the Everett site. Looking for skilled Programmers to create, verify, & revise Machine Control Data (MCD), geometry, and documentation that directs the operation of Optical Layup Template & Ultrasonic Knife Cutting equipment. In addition, the successful candidates will be able to provide machine operator instructions / documentation for automated or numerically controlled equipment's such as AFPs and ATLMs
Must Haves: the ideal applicants will be experienced within the following areas:
- Composite Fabrication & Techniques
- NC Traditional CAD / CAM Systems
- Trim, Drill, AFP, ATLM Equipment
- Composite Tooling (such as mandrels and fixtures)
- Defect reduction, Root cause
- Corrective action, Problem solving
Preferred candidates will have the following skills:
1. Pre-Cure Composites Manufacturing:
- CATIA V5
- NS2/nesting experience
- OLT (Optical Laser Template)
- USK (Ultrasonic Knife)
- Automated Fiber Placement (AFP)/Composite Tape Laying Machines (CTLM)
2.Post-Cure Composites Manufacturing:
- CATIA V5
- Vericut
- CATIA Advanced Machining Workbench
- Trim and Drill of composite parts
- Axis milling/machining of composite parts
Duration: 6 months
Location: Everett, WA
Provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction.
Searching for QTY 2 Composite NCP to provide Numerical Control Programming Expertise within the Pre-Cure / Green Part Space to support the manufacturing of detail parts within the 777 Composite Wing Center within the Everett site. Looking for skilled Programmers to create, verify, & revise Machine Control Data (MCD), geometry, and documentation that directs the operation of Optical Layup Template & Ultrasonic Knife Cutting equipment. In addition, the successful candidates will be able to provide machine operator instructions / documentation for automated or numerically controlled equipment's such as AFPs and ATLMs
Must Haves: the ideal applicants will be experienced within the following areas:
- Composite Fabrication & Techniques
- NC Traditional CAD / CAM Systems
- Trim, Drill, AFP, ATLM Equipment
- Composite Tooling (such as mandrels and fixtures)
- Defect reduction, Root cause
- Corrective action, Problem solving
Preferred candidates will have the following skills:
1. Pre-Cure Composites Manufacturing:
- CATIA V5
- NS2/nesting experience
- OLT (Optical Laser Template)
- USK (Ultrasonic Knife)
- Automated Fiber Placement (AFP)/Composite Tape Laying Machines (CTLM)
2.Post-Cure Composites Manufacturing:
- CATIA V5
- Vericut
- CATIA Advanced Machining Workbench
- Trim and Drill of composite parts
- Axis milling/machining of composite parts
Your Privacy Choices