CNC Lathe Setup Machinist (Night Shift)
•Today
Estimated Pay | $25 per hour |
---|---|
Hours | Full-time |
Location | Tempe, Arizona |
Compare Pay
Estimated Pay We estimate that this job pays $24.62 per hour based on our data.
$16.93
$24.62
$35.49
About this job
CNC Lathe Machinist
Align Precision in Tempe Arizona is seeking a highly motivated team member for our Night shift.
Description:
Summary/Objective: Effectively Set-Up & Operate CNC Lathes with Fanuc controllers while safely following quality requirement and production standards.
Essential Duties and Responsibilities:
While performing the duties of this job, the employee is regularly required stand for long periods of time, walk and reach. The ability to lift products and supplies, up to 40 pounds. May be subject to cutting fluids, lubricants, metal chips and moderate noises.
Other Duties
Additional duties may be required.
ADDITIONAL NOTES
ALIGN Precision is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ALIGN Precision are employed on an at-will basis.
This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.
A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)
Align Precision in Tempe Arizona is seeking a highly motivated team member for our Night shift.
- Full Benefits (Medical, Dental & Vision) start on day ONE!
- Available 401K with employer match contribution
- Weekly Pay
- An array of additional coverage available (Accident, short-term & long-term disability etc.)
Description:
Summary/Objective: Effectively Set-Up & Operate CNC Lathes with Fanuc controllers while safely following quality requirement and production standards.
Essential Duties and Responsibilities:
- Competently perform Set Ups and operation of CNC Lathes with and without live tooling.
- Read and follow job router, set-up sheet and work instructions.
- Correctly load and unload materials and parts into collets and chucks.
- Measure and document as required inspection data to assure part compliance.
- Read and interpret blueprint dimensions, symbols, and notes.
- Document counts.
- Organize, clean, and maintain work area.
- Communicate with Engineering on issues, needs, and improvements.
- 5 or more years setting up and operating CNC Lathes
- Attention to detail
- Excellent knowledge of machine and controller functions
- Excellent knowledge of machining principles
- Commanding knowledge of GD&T and applications
- Excellent mechanical skills
- Advanced mathematical and geometrical knowledge
- Good communicator with the ability to listen, ask questions, and provide solutions
- Ability to work extra hours when needed
- Self-Motivated
- Positive attitude
- Strong Work Ethic
- Familiar with AS9100 Standards
- High school diploma / GED
While performing the duties of this job, the employee is regularly required stand for long periods of time, walk and reach. The ability to lift products and supplies, up to 40 pounds. May be subject to cutting fluids, lubricants, metal chips and moderate noises.
Other Duties
Additional duties may be required.
ADDITIONAL NOTES
ALIGN Precision is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ALIGN Precision are employed on an at-will basis.
This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.
A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)
You might also like
in Tempe, AZ
$16
Pregis Corporation • 10h ago
Starting at $20.00
U.S. Venture • 10h ago
$25
Shearer's Foods • 10h ago
$40
Haven Behavioral Healthcare • 1h ago
$19
Forms + Surfaces • 10h ago
Companies hiring machine operators
in Tempe, AZ
Nearby locations
Explore more machine operator jobs
in Tempe, AZ
Nearby Job Titles
Delivery Driver Jobs Registered Nurse Jobs Driver Jobs Truck Driver Jobs Radiologic Technologist JobsNearby Locations
Phoenix, AZ Jobs Scottsdale, AZ Jobs Mesa, AZ Jobs Chandler, AZ Jobs Arizona JobsNearby Companies
Veyo Jobs Gulfstream Aerospace Corporation Jobs SSP Jobs Sherwin-Williams Jobs Travel Nurse Across America JobsNearby Categories
Full-time Jobs Part-time Jobs Gig Jobs Posting ID: 935461738 Posted: 2024-05-06 Job Title: Cnc Lathe Setup Machinist